AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
The blade decides whether thin brick edges come out crisp or chipped. The best masonry blade for cutting thin brick is a diamond blade sized for a 4-1/2 in grinder, with a rim style matched to the brick you are cutting.
We compared a continuous rim blade, a turbo rim blade, a segmented blade and a tuck point blade for mortar joints.
Quick Answer: The Best Masonry Blade for Cutting Thin Brick
- Best Overall: DEWALT DW4725 4-1/2 in Continuous Rim Diamond Blade for Masonry, Dry Cutting
- Best Turbo Value: FOXBC 4-1/2 in Turbo Diamond Blade for Masonry and Concrete (3-Pack)
- Best for Thick Clay Brick: EZARC 4-1/2 in Segmented Diamond Blade (2-Pack)
- Best for Mortar Joints: DEWALT DW4740 4-1/2 x 1/4 in Tuck Point Diamond Blade
The DEWALT DW4725 continuous rim diamond blade is the best masonry blade for cutting thin brick because it leaves the smoothest, most chip-free edges. FOXBC turbo blades balance speed and finish, and EZARC segmented blades cut thick clay brick fastest.
Best Masonry Blade for Cutting Thin Brick Comparison Table
| Product | Best For | Type | Key Feature | Buy |
|---|---|---|---|---|
| DEWALT DW4725 4-1/2 in Continuous Rim Diamond Blade for Masonry, Dry Cutting | Best Overall | Continuous rim diamond blade | Smooth, chip-free cuts in brick and tile | Check Price |
| FOXBC 4-1/2 in Turbo Diamond Blade for Masonry and Concrete (3-Pack) | Best Turbo Value | Turbo rim diamond blade | Fast, clean cuts, wet or dry, 3-pack | Check Price |
| EZARC 4-1/2 in Segmented Diamond Blade (2-Pack) | Best for Thick Clay Brick | Segmented diamond blade | Fastest cutting for thick clay brick | Check Price |
| DEWALT DW4740 4-1/2 x 1/4 in Tuck Point Diamond Blade | Best for Mortar Joints | Tuck point diamond blade | 1/4 in wide for raking mortar joints | Check Price |
The 4 Best Masonry Blade for Cutting Thin Brick
Our picks for the best masonry blade for cutting thin brick, ranked by edge quality, cutting speed, blade life and value.
DEWALT DW4725 4-1/2 in Continuous Rim Diamond Blade for Masonry, Dry Cutting
1The DEWALT DW4725 continuous rim blade leaves smooth, chip-free edges on thin brick and brick tile.
👍 Pros & Cons
Pros
- Clean edges on thin brick
- Thin kerf
- Long diamond life
Cons
- Slower than segmented
- Overheats if forced
📄 Detailed Review
- Size: 4-1/2 in
- Rim: Continuous
- Arbor: 7/8 in
- Cutting: Dry
- Use: Masonry, brick, tile
Make several shallow passes rather than one deep cut.
Let the blade cool between long cuts.
FOXBC 4-1/2 in Turbo Diamond Blade for Masonry and Concrete (3-Pack)
2The FOXBC turbo blades balance speed and clean edges, and the 3-pack covers a full thin brick project.
👍 Pros & Cons
Pros
- Good balance of speed and finish
- Three blades for the price
- Wet or dry
Cons
- Edges not as smooth as continuous rim
- Lesser-known brand
📄 Detailed Review
- Size: 4-1/2 in
- Rim: Turbo
- Kerf: 0.047 in
- Arbor: 7/8 in with adapters
- Pack: 3
Turbo rims suit both clay brick and porcelain brick tile.
Mark the blade direction and mount it correctly.
EZARC 4-1/2 in Segmented Diamond Blade (2-Pack)
3EZARC segmented blades cut fastest through thick clay brick, with rougher edges you hide in the mortar joint.
👍 Pros & Cons
Pros
- Very fast cutting
- Gaps help cooling
- Good for thick bricks
Cons
- Rougher edges
- More chipping on thin brick faces
📄 Detailed Review
- Size: 4-1/2 in
- Rim: Segmented
- Arbor: 7/8 in, 20 mm, 5/8 in
- Pack: 2
- Use: Granite, brick, concrete
Place cut edges into corners or joints where chipping is hidden.
Use for real clay brick, not delicate faces.
DEWALT DW4740 4-1/2 x 1/4 in Tuck Point Diamond Blade
4A tuck point blade grinds out mortar joints, useful when repairing or replacing individual thin bricks.
👍 Pros & Cons
Pros
- Clears old mortar fast
- Correct width for joints
- Trusted brand
Cons
- Not for cutting bricks
- Very dusty
📄 Detailed Review
- Size: 4-1/2 x 1/4 in
- Type: Tuck point
- Use: Removing mortar joints
- Brand: DEWALT
- Fit: 4-1/2 in grinders
Use with a dust shroud and vacuum.
Do not cut into brick edges.
How We Chose the Best Masonry Blade for Cutting Thin Brick
To choose the best masonry blade for cutting thin brick, we compared rim type, kerf, arbor fit, cutting speed and edge quality on clay, plaster and porcelain thin brick.
Cut brick outdoors, use water or a vacuum shroud and wear a respirator, following the OSHA crystalline silica guide.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Masonry Blade for Cutting Thin Brick
Use these points to choose the best masonry blade for cutting thin brick.
Continuous rim
A continuous rim gives the smoothest edge with the least chipping, ideal for visible cuts.
Turbo rim
A turbo rim cuts faster than continuous rim with only slightly rougher edges.
Segmented rim
Segmented blades are fastest and coolest but chip brick faces more.
Tuck point blades
Tuck point blades remove mortar joints; they are not for cutting bricks.
Dry vs. wet cutting
Most grinder blades cut dry; wet cutting with a tile saw cuts dust sharply.
Check the arbor
Make sure the blade arbor (usually 7/8 in) fits your grinder.
Blade Tips
Longer life, cleaner cuts.
- Let the blade do the work; do not force it.
- Make shallow passes on hard brick.
- Let the blade cool between long cuts.
- Mount the blade with the arrow pointing correctly.
Questions about the best masonry blade for cutting thin brick:
Frequently Asked Questions
What is the best masonry blade for cutting thin brick?
The DEWALT DW4725 continuous rim diamond blade is our top pick for clean, chip-free edges.
Continuous rim or segmented for brick?
Continuous rim for clean visible cuts; segmented for fast rough cuts you will hide.
Can I cut porcelain brick tile with a masonry blade?
Yes, a continuous rim or turbo diamond blade cuts porcelain cleanly.
How long does a diamond blade last?
Many cuts; avoid overheating and forcing it to extend life.
Do I need a tuck point blade?
Only to remove or repair mortar joints, not for cutting bricks.
Final Verdict
Our final pick for the best masonry blade for cutting thin brick is the DEWALT DW4725 Diamond Blade. Choose the FOXBC Turbo Diamond Blades if you want faster turbo cuts, or the EZARC Segmented Diamond Blade for fast cuts in thick clay brick.
Related Guides
More thin brick and veneer guides:
- Best Faux Brick on Amazon
- Best Angle Grinder for Cutting Thin Brick
- Best Masonry Waterproofing Sealer
- Best Masonry Sealer for Stone
- Best Jigsaw Blade for Faux Brick Panels
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.
