AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
Outside corners are where thin brick looks fake if you just butt two flat pieces together. The best thin brick corners give a finished brick return, either with flexible veneer that wraps the corner or with corner pieces and careful cuts.
Dedicated real-brick corner pieces are hard to find online, so we compared flexible veneers that bend around corners, a molded panel corner and the blade you need to cut mitered returns yourself.
Quick Answer: The Best Thin Brick Corners
- Best Overall: zoeteoz Vintage Red Flexible Thin Brick Tiles, Inorganic Modified Clay (100 pcs)
- Best Flexible Wrap: TORURAL Vintage Brown/Red Thin Brick Veneer Tiles (100 pcs, 14.2 sq ft)
- Best Indoor-Outdoor Flexible: Holydecot Red Faux Brick Wall Tiles, Thin Brick Veneer (76 pcs, 10 sq ft)
- Best Molded Panel Corner: GenStone Faux Brick 90 Degree Outside Corner Panel, Classic Brick (22.5 x 6.875 in)
- Best Blade to Cut Your Own: DEWALT DW4725 4-1/2 in Continuous Rim Diamond Blade for Masonry, Dry Cutting
zoeteoz flexible modified clay thin brick is the best option for thin brick corners because each piece bends around an outside corner for a continuous brick face. TORURAL flexible veneer is a close second, and a DEWALT continuous rim blade lets you miter real clay brick for clean returns.
Best Thin Brick Corners Comparison Table
| Product | Best For | Type | Key Feature | Buy |
|---|---|---|---|---|
| zoeteoz Vintage Red Flexible Thin Brick Tiles, Inorganic Modified Clay (100 pcs) | Best Overall | Flexible thin brick veneer | Bends to curved and uneven surfaces | Check Price |
| TORURAL Vintage Brown/Red Thin Brick Veneer Tiles (100 pcs, 14.2 sq ft) | Best Flexible Wrap | Flexible thin brick veneer | Real brick look, -37°F to 212°F | Check Price |
| Holydecot Red Faux Brick Wall Tiles, Thin Brick Veneer (76 pcs, 10 sq ft) | Best Indoor-Outdoor Flexible | Flexible thin brick veneer | Mineral + fiber, indoor/outdoor | Check Price |
| GenStone Faux Brick 90 Degree Outside Corner Panel, Classic Brick (22.5 x 6.875 in) | Best Molded Panel Corner | Faux brick outside corner piece | Molded 90 degree brick return | Check Price |
| DEWALT DW4725 4-1/2 in Continuous Rim Diamond Blade for Masonry, Dry Cutting | Best Blade to Cut Your Own | Continuous rim diamond blade | Smooth, chip-free cuts in brick and tile | Check Price |
The 5 Best Thin Brick Corners
Our picks for the best thin brick corners, ranked by corner realism, ease, material and value.
zoeteoz Vintage Red Flexible Thin Brick Tiles, Inorganic Modified Clay (100 pcs)
1zoeteoz’s modified-clay bricks are thin (0.12 inch), light and flexible, and the maker specifically says they fit curved and uneven surfaces.
👍 Pros & Cons
Pros
- Flexible design fits curved and uneven surfaces
- Very light, about 2 oz per brick
- Heat and weather resistant
- Realistic 3D clay texture
Cons
- Hand-set installation
- Needs adhesive and joint finishing
- Smaller brands have less long-term data
📄 Detailed Review
- Material: Inorganic modified clay
- Size: 8.85 x 2.36 x 0.12 in
- Coverage: About 14.5 sq ft (100 pieces)
- Weight: About 2 oz per piece
- Use: Fireplaces, backsplashes, accent walls, exteriors
A box of 100 pieces covers about 14.5 square feet. The listing highlights heat and weather resistance and resistance to cracking and fading.
If you need brick to wrap a column, bay wall or curved bar front, flexible clay veneer is the material to look at first.
TORURAL Vintage Brown/Red Thin Brick Veneer Tiles (100 pcs, 14.2 sq ft)
2TORURAL’s individual thin bricks are the most realistic option in this guide: each piece is set in adhesive like real brick veneer, and the maker rates them from -37°F to 212°F.
👍 Pros & Cons
Pros
- Individual bricks look the most like real masonry
- Flexible enough for curved walls
- Moisture, sunlight and washing resistant
- Rated for interior and exterior use
Cons
- Slowest install: each brick is set by hand
- Needs tile adhesive and spacing
- Not fireproof; keep away from open flame
📄 Detailed Review
- Material: Inorganic mineral powder + poly-acrylic binder
- Size: 2.36 x 8.66 x 0.15 in
- Coverage: 14.2 sq ft (100 bricks)
- Install: Premixed tile adhesive with a notched trowel
- Temperature range: -37°F to 212°F (install above 40°F)
- Use: Interior and exterior walls, fences, fireplace surrounds
The bricks are made from inorganic mineral powder with a poly-acrylic binder and are flexible enough for curved surfaces. The manufacturer recommends spreading premixed tile adhesive with a notched trowel and pressing each brick into place, and notes they can go over drywall, concrete and wood.
Expect a slower, more “real” installation with visible mortar-style joints. The listing is clear that the veneer is not fireproof, so keep proper clearance around fireplaces.
Holydecot Red Faux Brick Wall Tiles, Thin Brick Veneer (76 pcs, 10 sq ft)
3Holydecot’s thin brick tiles combine mineral powder with high-strength fiber and are sold for indoor and outdoor walls.
👍 Pros & Cons
Pros
- Very thin and light (0.1 lb each)
- Water and heat resistant
- Indoor and outdoor rated
- Becomes sturdy once bonded
Cons
- Fragile before installation
- Hand-set install
- Smaller coverage per box
📄 Detailed Review
- Material: Inorganic mineral powder and high-strength fiber
- Size: 8.7 x 2.4 x 0.1 in
- Coverage: About 10 sq ft (76 pieces)
- Use: Indoor and outdoor walls
The maker notes the bricks are fragile until they are attached, then become very sturdy once bonded to the wall. Each is just 0.1 inch thick.
Handle the box carefully, bond each brick fully, and you get a real-brick look in very little wall depth.
GenStone Faux Brick 90 Degree Outside Corner Panel, Classic Brick (22.5 x 6.875 in)
4GenStone sells molded outside corner pieces that wrap a 90 degree corner with a finished brick return.
👍 Pros & Cons
Pros
- Finished brick return on corners
- No mitering needed
- Matches GenStone panels
Cons
- Made for GenStone panels, not real brick
- Color match to other brands varies
📄 Detailed Review
- Type: Outside corner panel
- Size: 22.5 x 6.875 in
- Color: Classic brick
- Angle: 90 degrees
- Use: With GenStone faux brick panels
Install corners first, then run panels toward them.
Use matching touch-up paint on any cut edges.
DEWALT DW4725 4-1/2 in Continuous Rim Diamond Blade for Masonry, Dry Cutting
5The DEWALT DW4725 continuous rim blade leaves smooth, chip-free edges on thin brick and brick tile.
👍 Pros & Cons
Pros
- Clean edges on thin brick
- Thin kerf
- Long diamond life
Cons
- Slower than segmented
- Overheats if forced
📄 Detailed Review
- Size: 4-1/2 in
- Rim: Continuous
- Arbor: 7/8 in
- Cutting: Dry
- Use: Masonry, brick, tile
Make several shallow passes rather than one deep cut.
Let the blade cool between long cuts.
How We Chose the Best Thin Brick Corners
To choose the best thin brick corners, we compared how convincingly each option finishes an outside corner, how easy it is, the material and the cost.
Cut brick outdoors, use water or a vacuum shroud and wear a respirator, following the OSHA crystalline silica guide.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Thin Brick Corners
Use these points to choose the best thin brick corners.
Why corners matter
A flat brick face meeting another at a corner shows the thin edge and gives away a veneer.
Flexible wrap
Flexible veneer bends around 90 degree corners for a seamless return.
Mitered returns
Cut two bricks at 45 degrees with a diamond blade so they meet at the corner.
Alternate the returns
Alternate long and short returns on each row, like real brick bond.
Corner pieces
Some systems include L-shaped corners; match brand and color.
Protect corners
Outside corners take bumps; set them firmly with full mortar coverage.
Corner Tips
Corners that look solid.
- Install corners before field bricks.
- Alternate long and short returns.
- Miter with a continuous rim blade.
- Back-butter corner pieces fully.
Questions about the best thin brick corners:
Frequently Asked Questions
What are the best thin brick corners?
zoeteoz flexible thin brick is our top pick because it wraps outside corners in one piece.
Do thin brick corners come separately?
Some brands sell L-shaped corners; many DIY products expect you to miter or wrap.
How do I make thin brick corners without corner pieces?
Miter two bricks at 45 degrees or use flexible veneer that bends.
Should I install corners first?
Yes, set corners first and work the field bricks toward them.
Can I mix flexible corners with clay brick?
It is better to keep one material so color and texture match.
Final Verdict
Our final pick for the best thin brick corners is the zoeteoz Flexible Clay Brick. Choose the TORURAL Thin Brick Veneer if you want easy flexible wraps, or the Holydecot Thin Brick Tiles for cutting mitered returns.
Related Guides
More thin brick and veneer guides:
- Best Faux Brick on Amazon
- Best Grout for Thin Brick Veneer
- Best Angle Grinder for Cutting Thin Brick
- Best Mortar for Thin Brick Veneer
- Best Masonry Blade for Cutting Thin Brick
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.
