AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
Net lights are fast for covering brick walls, planters and low hedges, but corners flap loose. The best christmas light clips for net lights on brick pin each corner and edge so the net lies flat.
We compared spring steel brick clips, adjustable stainless clamps, a 24-pack of stainless clips, adjustable block hangers and Command clips for trim.
Quick Answer: The Best Christmas Light Clips for Net Lights on Brick
- Best Overall: Brick Clips (12 Pack) for Standard Bricks 2-1/4 to 2-3/8 in High
- Best Corner Anchor: Lewufe Stainless Steel Brick Wall Clips, Adjustable 1-3/4 to 2-1/2 in (6 Pack)
- Best Value Pack: Stainless Steel Brick Wall Clips for Outdoor Christmas Decor (24 Pack)
- Best for Wide Walls: No-Drill Cinder Block Wall String Light Hangers, Adjustable 4.3 to 8 in (5 Pack)
- Best for Smooth Trim: Command Outdoor Light Clips, Clear (20 Clips, 24 Strips)
Spring steel brick clips are the best christmas light clips for net lights on brick because they hold net edges flat without drilling. Use adjustable clamps at the four corners for extra hold.
Best Christmas Light Clips for Net Lights on Brick Comparison Table
| Product | Best For | Type | Key Feature | Buy |
|---|---|---|---|---|
| Brick Clips (12 Pack) for Standard Bricks 2-1/4 to 2-3/8 in High | Best Overall | Spring steel brick clips | No-drill, fits standard brick height | Check Price |
| Lewufe Stainless Steel Brick Wall Clips, Adjustable 1-3/4 to 2-1/2 in (6 Pack) | Best Corner Anchor | Adjustable stainless brick clamps | Screw-adjusted clamp, holds up to 30 lb per maker | Check Price |
| Stainless Steel Brick Wall Clips for Outdoor Christmas Decor (24 Pack) | Best Value Pack | Stainless wire brick clips | 24 clips for long light runs | Check Price |
| No-Drill Cinder Block Wall String Light Hangers, Adjustable 4.3 to 8 in (5 Pack) | Best for Wide Walls | Adjustable wall clamp hangers | Fits 4.3 to 8 in for block and columns | Check Price |
| Command Outdoor Light Clips, Clear (20 Clips, 24 Strips) | Best for Smooth Trim | Adhesive outdoor light clips | Damage-free removal on smooth surfaces | Check Price |
The 5 Best Christmas Light Clips for Net Lights on Brick
Our picks for the best christmas light clips for net lights on brick, ranked by edge hold, corner anchoring, fit and value.
Brick Clips (12 Pack) for Standard Bricks 2-1/4 to 2-3/8 in High
1These spring steel brick clips grip standard-height bricks without drilling and can be moved and reused each season.
👍 Pros & Cons
Pros
- No drilling into brick or mortar
- Easy to move and reuse
- Holds wreaths, garland and light runs
Cons
- Only fits standard brick heights
- Needs protruding brick faces
📄 Detailed Review
- Fit: Bricks 2-1/4 to 2-3/8 in high
- Material: Tempered spring steel
- Install: Clips over brick, no tools
- Pack: 12
- Use: Indoor and outdoor
Measure your brick height before ordering.
Space clips every 2 to 3 feet for string lights.
Lewufe Stainless Steel Brick Wall Clips, Adjustable 1-3/4 to 2-1/2 in (6 Pack)
2Lewufe clips are screw-adjusted stainless clamps that grip the brick face without drilling and are rated by the maker up to 30 pounds.
👍 Pros & Cons
Pros
- Adjustable fit
- Stainless resists rust
- Strong for garland and wreaths
Cons
- Needs a wrench to set
- Fewer pieces per pack
📄 Detailed Review
- Fit: Bricks 1-3/4 to 2-1/2 in
- Material: Stainless steel
- Install: Tighten screw clamp, no drilling
- Pack: 6
- Load: Up to 30 lb (per maker)
Tighten firmly but do not over-torque soft brick.
Use for anchor points at corners and columns.
Stainless Steel Brick Wall Clips for Outdoor Christmas Decor (24 Pack)
3This 24-pack of stainless wire clips fits standard bricks with recessed mortar and covers long runs of lights.
👍 Pros & Cons
Pros
- Lots of clips for long runs
- Rust resistant
- No tools
Cons
- Needs recessed mortar joints
- Fixed size
📄 Detailed Review
- Fit: Bricks 2-1/4 to 2-2/5 in
- Material: 2 mm stainless wire
- Gap needed: Over 1/8 in mortar recess
- Pack: 24
- Install: No drilling
Check that mortar is recessed at least 1/8 in.
Use clips every 2 feet in windy areas.
No-Drill Cinder Block Wall String Light Hangers, Adjustable 4.3 to 8 in (5 Pack)
4These adjustable clamp hangers fit 4.3 to 8 inch block or wall caps for heavier string light anchor points.
👍 Pros & Cons
Pros
- Fits larger block and wall caps
- Strong anchor points
- No holes
Cons
- Bulky
- Only 5 per pack
📄 Detailed Review
- Fit: 4.3 to 8 in
- Material: Powder-coated metal
- Pack: 5
- Install: Tension clamp, no drilling
- Use: Block walls, string lights
Use as anchors at ends of runs.
Check fit on your column or wall cap.
Command Outdoor Light Clips, Clear (20 Clips, 24 Strips)
5Command Outdoor Light Clips use water-resistant strips that work on smooth outdoor surfaces like trim and painted block, not rough raw brick.
👍 Pros & Cons
Pros
- Removes cleanly from smooth surfaces
- Water and UV resistant
- Clear and discreet
Cons
- Not for rough, unsealed brick
- Temperature limits for install
📄 Detailed Review
- Clips: 20 clear
- Strips: 24 water-resistant
- Surfaces: Smooth: doors, vinyl siding, trim, painted block
- Spacing: One clip per 2 ft (per maker)
- Use: Outdoor
Stick them to window trim or painted surfaces, not raw brick.
Install in mild weather and wait before hanging lights.
How We Chose the Best Christmas Light Clips for Net Lights on Brick
To choose the best christmas light clips for net lights on brick, we compared how well each holds net edges and corners, brick fit and value.
Check cords for damage and use lights rated for outdoor use, following the CPSC holiday safety guide.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Christmas Light Clips for Net Lights on Brick
Use these points to choose the best christmas light clips for net lights on brick.
Anchor corners first
Clamp all four corners, then fill edges.
Stretch evenly
Pull the net taut but not tight.
Edge clips
Clip edges every 2 feet.
Join nets
Connect nets end to end within the maker limit.
Low walls
Net lights suit low brick walls and planters.
Wind
Add clips in windy spots.
Net Light Tips
Flat and even.
- Anchor corners.
- Stretch evenly.
- Clip edges.
- Check connection limits.
Questions about the best christmas light clips for net lights on brick:
Frequently Asked Questions
How do you hang net lights on brick?
Clamp corners and clip edges with brick clips.
Can net lights go on a brick wall?
Yes, especially low walls and planters.
How many clips per net?
Four corners plus edges every 2 feet.
Do adhesive clips hold net lights?
On smooth trim only.
How many nets can I connect?
Check the maker limit.
Final Verdict
Our final pick for the best christmas light clips for net lights on brick is the Spring Steel Brick Clips (12 Pack). Choose the Lewufe Adjustable Brick Clips if you want corner anchors, or the Stainless Brick Clips (24 Pack) for a value pack.
Related Guides
More guides to hanging on brick:
- Best Faux Brick on Amazon
- Best Christmas Light Clips for Icicle Lights on Brick
- Best Christmas Light Clips for Brick Around Windows
- Best Christmas Light Clips for Brick In Snowy Climates
- Best Christmas Light Clips for Brick In Windy Areas
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.
