AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
Brick pavers fade, grow moss and lose joint sand without protection. The best brick sealer for brick pavers repels water and stains, helps lock joint sand and gives the finish you want, from invisible to rich wet look.
Paver sealers fall into two camps: penetrating (natural look, breathable) and film-forming (enhanced color, more sheen). We compared both.

- Quick Answer: The Best Brick Sealer for Brick Pavers
- Best Brick Sealer for Brick Pavers Comparison Table
- The 6 Best Sealers for Brick Pavers
- Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
- MasonryDefender Gloss Wet Look Patio Paver Sealer (2.5 gal)
- Wet Pave Paver Sealer, Color Enhancing Masonry Sealer for Concrete, Brick & Stone
- Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
- Natural Pave Concrete & Paver Sealer, Clear Water-Based (5 gal)
- Chapin 19494 3.5-Gallon Industrial Concrete Sprayer, Tri-Poxy Steel
- How We Chose the Best Brick Sealer for Brick Pavers
- Buying Guide: Best Brick Sealer for Brick Pavers
- How to Seal Brick Pavers
- Frequently Asked Questions
- Final Verdict
- Related Guides
Quick Answer: The Best Brick Sealer for Brick Pavers
- Best Natural Look: Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
- Best Wet Look: MasonryDefender Gloss Wet Look Patio Paver Sealer (2.5 gal)
- Best Joint Sand Locking: Wet Pave Paver Sealer, Color Enhancing Masonry Sealer for Concrete, Brick & Stone
- Best Traffic-Rated Penetrating: Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
- Best Big-Patio Pail: Natural Pave Concrete & Paver Sealer, Clear Water-Based (5 gal)
- Best Sprayer: Chapin 19494 3.5-Gallon Industrial Concrete Sprayer, Tri-Poxy Steel
The Siloxane 9500 penetrating sealer is the best brick sealer for brick pavers if you want a natural look with salt and water repellency; MasonryDefender’s wet look is the best for rich color, and Wet Pave enhances color while locking joint sand.
Best Brick Sealer for Brick Pavers Comparison Table
| Product | Best For | Type | Key Feature | Buy |
|---|---|---|---|---|
| Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal) | Best Natural Look | Silane/siloxane penetrating sealer | DOT-approved per listing, salt and water repellent | Check Price |
| MasonryDefender Gloss Wet Look Patio Paver Sealer (2.5 gal) | Best Wet Look | Film-forming paver sealer | Gloss, wet look | Check Price |
| Wet Pave Paver Sealer, Color Enhancing Masonry Sealer for Concrete, Brick & Stone | Best Joint Sand Locking | Color-enhancing paver sealer | Enhances color, locks joint sand | Check Price |
| Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal) | Best Traffic-Rated Penetrating | Penetrating siloxane sealer | Penetrating, traffic-rated per listing | Check Price |
| Natural Pave Concrete & Paver Sealer, Clear Water-Based (5 gal) | Best Big-Patio Pail | Clear paver sealer | Clear, water-based, 5 gal | Check Price |
| Chapin 19494 3.5-Gallon Industrial Concrete Sprayer, Tri-Poxy Steel | Best Sprayer | Industrial pump sprayer | Steel tank, chemical-resistant seals | Check Price |
The 6 Best Sealers for Brick Pavers
Our picks for the best brick sealer for brick pavers.
Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
1A ready-to-use silane/siloxane penetrating sealer listed for pavers, brick and stone.
👍 Pros & Cons
Pros
- Silane/siloxane blend penetrates deep
- Salt and water repellent
- Listed coverage 150-400 sq ft per gallon
Cons
- Coverage varies with porosity
- No color enhancement
📄 Detailed Review
- Type: Silane/siloxane penetrating
- Finish: Natural look
- Base: Water-based, ready to use
- Best for: Pavers, driveways, brick, stone
Silane/siloxane blends penetrate dense and porous masonry, useful in freeze-thaw areas where salt and water cause spalling.
Apply until the surface is evenly wet, avoiding puddles.
MasonryDefender Gloss Wet Look Patio Paver Sealer (2.5 gal)
2A water-based wet-look sealer for brick and stone pavers.
👍 Pros & Cons
Pros
- Wet-look color boost
- Water-based
- Large 2.5 gal size
Cons
- Darkens and adds gloss
- Can be slippery when wet
📄 Detailed Review
- Type: Water-based film sealer
- Finish: Gloss, wet look
- Base: Water-based
- Best for: Pavers and patios
Gloss sealers deepen color and add shine, the opposite of a natural-look sealer.
Consider a non-slip additive on walkways.
Wet Pave Paver Sealer, Color Enhancing Masonry Sealer for Concrete, Brick & Stone
3Wet Pave enhances brick paver color and helps lock joint sand.
👍 Pros & Cons
Pros
- Enhances paver color
- Joint sand locking
- UV resistant per listing
Cons
- Darkens pavers
- Film can wear in traffic
📄 Detailed Review
- Type: Color-enhancing sealer
- Finish: Enhanced, satin wet look
- Base: Water-based per listing
- Best for: Brick pavers, patios
Choose an enhancing sealer only if you like the darker, wet look.
Apply to clean, dry pavers after sanding joints.
Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
4Drylok Siloxane 7 is a widely available penetrating sealer for brick and masonry, including traffic surfaces.
👍 Pros & Cons
Pros
- Trusted masonry waterproofing brand
- Listed for vehicle traffic
- Penetrating, breathable
Cons
- Goes on milky white
- Two coats may be needed on porous brick
📄 Detailed Review
- Type: Penetrating siloxane
- Finish: Clear when dry (goes on milky)
- Base: Water-based
- Best for: Brick, pavers, masonry
It goes on milky and dries clear. Penetrating formulas protect without the slippery film of acrylics.
Do a test patch to check the final look.
Natural Pave Concrete & Paver Sealer, Clear Water-Based (5 gal)
5Natural Pave is a clear water-based paver sealer in a 5-gallon pail for big patios.
👍 Pros & Cons
Pros
- Large 5 gal pail
- Locks joint sand
- Water-based
Cons
- Large purchase
- May slightly enhance color
📄 Detailed Review
- Type: Water-based paver sealer
- Finish: Clear, natural
- Base: Water-based
- Best for: Brick pavers, patios, driveways
It is a more natural-looking alternative to wet-look sealers.
Test a corner first.
Chapin 19494 3.5-Gallon Industrial Concrete Sprayer, Tri-Poxy Steel
6Chapin’s industrial concrete sprayer handles big paver and wall jobs.
👍 Pros & Cons
Pros
- Chemical-resistant seals
- Large tank
- Brass components
Cons
- Heavy when full
- Higher cost
📄 Detailed Review
- Capacity: 3.5 gallons
- Tank: Tri-Poxy steel
- Best for: Large paver and masonry jobs
Chemical-resistant seals make it better for a wider range of sealers.
Check seal compatibility with your sealer.
How We Chose the Best Brick Sealer for Brick Pavers
To choose the best brick sealer for brick pavers, we compared penetrating versus film sealers, finish and color change, whether listings mention joint sand stabilization, traffic ratings and coverage.
Moss and mildew thrive on damp masonry; the EPA covers moisture basics in its EPA guide to mold and moisture.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Brick Sealer for Brick Pavers
Tips for choosing the best brick sealer for brick pavers.
Natural or wet look
Penetrating sealers look unsealed; wet-look sealers deepen color and add sheen.

Joint sand first
Refill joints with sand (or polymeric sand) before sealing.
Clean and dry
Remove moss, stains and efflorescence; let pavers dry fully.
Watch the weather
Seal on dry days within the label’s temperature range, with no rain forecast.
Slip risk
Gloss sealers can be slippery; add a non-slip additive on walkways.
Reseal schedule
Film sealers wear in traffic; reseal every few years.
How to Seal Brick Pavers
A weekend method.
- Pressure wash gently and let dry 48 hours.
- Refill joint sand.
- Apply thin, even coats with a sprayer.
- Keep traffic off until cured.
Questions about the best brick sealer for brick pavers:

Frequently Asked Questions
What is the best brick sealer for brick pavers?
The best brick sealer for brick pavers is a penetrating silane/siloxane for a natural look, or a wet-look sealer like MasonryDefender’s for richer color.
Should I seal brick pavers?
Sealing reduces staining, fading and weed growth in joints.
How often should pavers be sealed?
Every few years, depending on traffic and sealer type.
Will sealer make pavers slippery?
Glossy sealers can; use non-slip additives.
Do I need polymeric sand?
It helps lock joints; seal after it cures.
Final Verdict
Our final pick for the best brick sealer for brick pavers is the Siloxane 9500 Penetrating Sealer. Choose the MasonryDefender Wet Look Paver Sealer if you want a rich wet look, or the Wet Pave Paver Sealer for locking joint sand.
Related Guides
More outdoor brick guides:
- Best Faux Brick on Amazon
- Best Brick Sealer for Basement Walls
- Best Brick Sealer for Brick Floors
- Best Brick Sealer for a Kitchen Backsplash
- Best Brick Dust Sealer
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.






