AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
Brick floors in kitchens, mudrooms and sunrooms are charming but porous: spills soak in and dirt grinds into the surface. The best brick sealer for brick floors blocks stains, makes cleaning easier and stays slip-resistant underfoot.
Floors face foot traffic, grit and mopping, so we compared penetrating sealers (natural look, most slip-resistant) and satin film sealers (easier cleaning, more sheen).
Quick Answer: The Best Brick Sealer for Brick Floors
- Best Overall: Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
- Best Easy-Clean Satin: MasonryDefender Brick Sealer Satin Sheen, Water-Based, Reduces Dust (1 gal, 2-Pack)
- Best for Kitchen Floors: Miracle Sealants 511 Porous Plus Penetrating Sealer (32 oz) with Tile & Stone Cleaner
- Best Penetrating Value: Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
- Best Color-Enhancing: Wet Pave Paver Sealer, Color Enhancing Masonry Sealer for Concrete, Brick & Stone
- Best Sprayer: Chapin 25020 2-Gallon Clean ’N Seal Poly Deck Sprayer for Cleaners and Sealers
Drylok Siloxane 7 is the best brick sealer for brick floors when you want a natural, slip-resistant finish because it is listed for traffic surfaces; MasonryDefender’s satin brick sealer is the best easy-clean film option, and Miracle 511 Porous Plus adds oil-stain protection in kitchens.
Best Brick Sealer for Brick Floors Comparison Table
The 6 Best Sealers for Brick Floors
Our picks for the best brick sealer for brick floors.
Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
1Drylok Siloxane 7 is a widely available penetrating sealer for brick and masonry, including traffic surfaces.
👍 Pros & Cons
Pros
- Trusted masonry waterproofing brand
- Listed for vehicle traffic
- Penetrating, breathable
Cons
- Goes on milky white
- Two coats may be needed on porous brick
📄 Detailed Review
- Type: Penetrating siloxane
- Finish: Clear when dry (goes on milky)
- Base: Water-based
- Best for: Brick, pavers, masonry
It goes on milky and dries clear. Penetrating formulas protect without the slippery film of acrylics.
Do a test patch to check the final look.
MasonryDefender Brick Sealer Satin Sheen, Water-Based, Reduces Dust (1 gal, 2-Pack)
2MasonryDefender’s satin brick sealer is made to lock down dusty brick and make it easier to clean.
👍 Pros & Cons
Pros
- Listed as reducing brick dust
- Easy-clean surface
- Water-based
Cons
- Satin sheen changes the look slightly
- Film-forming, less breathable
📄 Detailed Review
- Type: Water-based film sealer
- Finish: Satin
- Base: Water-based
- Best for: Interior brick, dusty brick, easy cleaning
Interior exposed brick often sheds dust; a film-forming sealer binds the surface.
Test a hidden area to check sheen and color.
Miracle Sealants 511 Porous Plus Penetrating Sealer (32 oz) with Tile & Stone Cleaner
3Miracle 511 Porous Plus is a penetrating sealer for highly porous surfaces such as unpolished stone and brick.
👍 Pros & Cons
Pros
- Penetrates porous surfaces
- Protects against water and oil-based stains
- Bundle includes a cleaner
Cons
- Solvent odor
- Small quart size
📄 Detailed Review
- Type: Penetrating impregnator
- Finish: Natural, non-glossy
- Base: Solvent-based
- Best for: Porous stone, brick, tile
Impregnators protect inside the pores without a visible film.
Ventilate well during application.
Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
4A ready-to-use silane/siloxane penetrating sealer listed for pavers, brick and stone.
👍 Pros & Cons
Pros
- Silane/siloxane blend penetrates deep
- Salt and water repellent
- Listed coverage 150-400 sq ft per gallon
Cons
- Coverage varies with porosity
- No color enhancement
📄 Detailed Review
- Type: Silane/siloxane penetrating
- Finish: Natural look
- Base: Water-based, ready to use
- Best for: Pavers, driveways, brick, stone
Silane/siloxane blends penetrate dense and porous masonry, useful in freeze-thaw areas where salt and water cause spalling.
Apply until the surface is evenly wet, avoiding puddles.
Wet Pave Paver Sealer, Color Enhancing Masonry Sealer for Concrete, Brick & Stone
5Wet Pave enhances brick paver color and helps lock joint sand.
👍 Pros & Cons
Pros
- Enhances paver color
- Joint sand locking
- UV resistant per listing
Cons
- Darkens pavers
- Film can wear in traffic
📄 Detailed Review
- Type: Color-enhancing sealer
- Finish: Enhanced, satin wet look
- Base: Water-based per listing
- Best for: Brick pavers, patios
Choose an enhancing sealer only if you like the darker, wet look.
Apply to clean, dry pavers after sanding joints.
Chapin 25020 2-Gallon Clean ’N Seal Poly Deck Sprayer for Cleaners and Sealers
6Chapin’s Clean ’N Seal is built for applying cleaners and transparent sealers.
👍 Pros & Cons
Pros
- Designed for transparent sealers and cleaners
- Fan tip for even coats
- Poly tank resists corrosion
Cons
- Seals may not suit strong solvents
- Pumping needed
📄 Detailed Review
- Capacity: 2 gallons
- Tank: Poly
- Best for: Water-based sealers and cleaners
A low-pressure sprayer with a fan tip lays down even, flood-style coats of penetrating sealer.
Rinse thoroughly after each use.
How We Chose the Best Brick Sealer for Brick Floors
To choose the best brick sealer for brick floors, we compared traffic ratings in listings, whether the finish adds sheen (and slipperiness), stain and oil protection, and how each changes brick color.
Ventilate well and keep people off floors while sealer cures, following the EPA guide to VOCs indoors.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Brick Sealer for Brick Floors
Tips for choosing the best brick sealer for brick floors.
Slip resistance first
Glossy film sealers can be slick when wet. Penetrating or satin finishes are safer on floors.
Penetrating for natural look
Penetrating sealers keep the brick looking unsealed while repelling water.
Film for easy mopping
Satin film sealers make floors easier to mop but need recoating as they wear.
Clean thoroughly first
Old wax, grime and efflorescence must be removed before sealing.
Seal joints too
Mortar joints absorb more than brick; saturate them.
Allow full cure
Keep traffic off for the time on the label.
Sealing a Brick Floor
Step by step.
- Strip old wax and deep clean.
- Let the floor dry 48 hours.
- Apply thin coats with a sprayer or pad.
- Keep traffic off until fully cured.
Questions about the best brick sealer for brick floors:
Frequently Asked Questions
What is the best brick sealer for brick floors?
The best brick sealer for brick floors is a penetrating sealer like Drylok Siloxane 7 for a natural, slip-resistant look, or a satin sealer for easier cleaning.
Will sealer make my brick floor slippery?
Glossy sealers can; penetrating and satin finishes are safer.
How often should brick floors be resealed?
Film sealers every few years; penetrating sealers when water stops beading.
Can I seal an old waxed brick floor?
Strip the wax first.
Does sealing darken brick floors?
Penetrating sealers change little; enhancers darken.
Final Verdict
Our final pick for the best brick sealer for brick floors is the Drylok Siloxane 7. Choose the MasonryDefender Satin Brick Sealer if you want easy-clean satin, or the Miracle 511 Porous Plus for kitchen floors.
Related Guides
More brick sealer guides:
- Best Faux Brick on Amazon
- Best Brick Sealer for Basement Walls
- Best Brick Sealer for a Kitchen Backsplash
- Best Brick Dust Sealer
- Best Paint for 3D Foam Brick Panels
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.
