AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
“Clear” on a sealer label does not always mean invisible: some dry with a sheen or a darker, wet tone. The best clear brick sealer that does not darken dries truly invisible, with no gloss, no color change and no white residue.
This guide focuses on application: how clear penetrating sealers behave as they dry, why some go on milky, and how to avoid streaks or haze.
Quick Answer: The Clearest Brick Sealers
- Best Overall: Prosoco Sure Klean Weather Seal Siloxane PD Water Repellent (1 gal)
- Best Milky-to-Clear: Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
- Best for Brick Paving: Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
- Best Value: MasonryDefender Deep Penetrating Silane Siloxane Water Repellent (1 gal, 2-Pack)
- Best for Chimneys: MasonryDefender Chimney Brick Sealer, Clear Water-Based Siloxane (1 gal, 2-Pack)
- Best Sprayer for Even Coats: Chapin 25020 2-Gallon Clean ’N Seal Poly Deck Sprayer for Cleaners and Sealers
Prosoco Siloxane PD is the best clear brick sealer that does not darken for most brick because it dries invisible; Drylok Siloxane 7 goes on milky white but dries clear, and the Siloxane 9500 blend is a clear option for brick paving.
Clear Brick Sealers Compared
| Product | Best For | Type | Key Feature | Buy |
|---|---|---|---|---|
| Prosoco Sure Klean Weather Seal Siloxane PD Water Repellent (1 gal) | Best Overall | Penetrating siloxane water repellent | Breathable, invisible water repellent | Check Price |
| Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal) | Best Milky-to-Clear | Penetrating siloxane sealer | Penetrating, traffic-rated per listing | Check Price |
| Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal) | Best for Brick Paving | Silane/siloxane penetrating sealer | DOT-approved per listing, salt and water repellent | Check Price |
| MasonryDefender Deep Penetrating Silane Siloxane Water Repellent (1 gal, 2-Pack) | Best Value | Silane/siloxane penetrating sealer | Deep penetrating water repellent | Check Price |
| MasonryDefender Chimney Brick Sealer, Clear Water-Based Siloxane (1 gal, 2-Pack) | Best for Chimneys | Penetrating siloxane sealer | Breathable siloxane for chimneys | Check Price |
| Chapin 25020 2-Gallon Clean ’N Seal Poly Deck Sprayer for Cleaners and Sealers | Best Sprayer for Even Coats | Pump sprayer | 2-gal sprayer made for sealers | Check Price |
The 6 Best Clear, Non-Darkening Sealers
Our picks for the best clear brick sealer that does not darken.
Prosoco Sure Klean Weather Seal Siloxane PD Water Repellent (1 gal)
1Prosoco’s Siloxane PD is a professional penetrating water repellent for brick and masonry walls.
👍 Pros & Cons
Pros
- Pro brand used on brick facades
- Breathable, does not trap moisture
- Natural, non-glossy look
Cons
- Not a stain or color
- Needs dry, clean brick
📄 Detailed Review
- Type: Penetrating siloxane
- Finish: Invisible / natural look
- Base: Water-based
- Best for: Exterior brick and masonry walls
Penetrating siloxanes soak into masonry and make it shed water while still letting vapor escape, which is why they are favored for exterior brick and chimneys.
Apply to dry, clean brick and follow the label’s saturation directions.
Drylok Siloxane 7 Brick & Masonry Penetrating Sealer (1 gal)
2Drylok Siloxane 7 is a widely available penetrating sealer for brick and masonry, including traffic surfaces.
👍 Pros & Cons
Pros
- Trusted masonry waterproofing brand
- Listed for vehicle traffic
- Penetrating, breathable
Cons
- Goes on milky white
- Two coats may be needed on porous brick
📄 Detailed Review
- Type: Penetrating siloxane
- Finish: Clear when dry (goes on milky)
- Base: Water-based
- Best for: Brick, pavers, masonry
It goes on milky and dries clear. Penetrating formulas protect without the slippery film of acrylics.
Do a test patch to check the final look.
Siloxane 9500 Ready-to-Use Silane/Siloxane Penetrating Sealer (1 gal)
3A ready-to-use silane/siloxane penetrating sealer listed for pavers, brick and stone.
👍 Pros & Cons
Pros
- Silane/siloxane blend penetrates deep
- Salt and water repellent
- Listed coverage 150-400 sq ft per gallon
Cons
- Coverage varies with porosity
- No color enhancement
📄 Detailed Review
- Type: Silane/siloxane penetrating
- Finish: Natural look
- Base: Water-based, ready to use
- Best for: Pavers, driveways, brick, stone
Silane/siloxane blends penetrate dense and porous masonry, useful in freeze-thaw areas where salt and water cause spalling.
Apply until the surface is evenly wet, avoiding puddles.
MasonryDefender Deep Penetrating Silane Siloxane Water Repellent (1 gal, 2-Pack)
4MasonryDefender’s silane siloxane is a deep penetrating water repellent sold in a two-gallon pack.
👍 Pros & Cons
Pros
- Deep penetrating formula
- Two gallons per order
- Breathable
Cons
- Two-pack is more than small jobs need
- Not for glossy look
📄 Detailed Review
- Type: Silane/siloxane penetrating
- Finish: Natural look
- Base: Water-based
- Best for: Concrete, brick, block
Good for larger walls, block and concrete where you want water beading without changing the look.
Spray with a low-pressure pump sprayer.
MasonryDefender Chimney Brick Sealer, Clear Water-Based Siloxane (1 gal, 2-Pack)
5A breathable siloxane sealer marketed specifically for chimney brick.
👍 Pros & Cons
Pros
- Made for chimneys
- Breathable waterproofer
- Clear
Cons
- Does not fix cracked crowns or flashing
- Two-gallon pack
📄 Detailed Review
- Type: Penetrating siloxane
- Finish: Clear
- Base: Water-based
- Best for: Chimneys and exterior vertical masonry
Chimneys need breathable sealers so moisture inside the masonry can escape.
Repair crowns, flashing and mortar first.
Chapin 25020 2-Gallon Clean ’N Seal Poly Deck Sprayer for Cleaners and Sealers
6Chapin’s Clean ’N Seal is built for applying cleaners and transparent sealers.
👍 Pros & Cons
Pros
- Designed for transparent sealers and cleaners
- Fan tip for even coats
- Poly tank resists corrosion
Cons
- Seals may not suit strong solvents
- Pumping needed
📄 Detailed Review
- Capacity: 2 gallons
- Tank: Poly
- Best for: Water-based sealers and cleaners
A low-pressure sprayer with a fan tip lays down even, flood-style coats of penetrating sealer.
Rinse thoroughly after each use.
How We Judged Clarity
To pick the best clear brick sealer that does not darken, we compared how each clear sealer looks fully dry, whether it leaves sheen or residue, how forgiving it is to apply evenly and coverage.
Clear sealers help manage water; see the EPA guide to mold and moisture.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Clear Brick Sealer That Does Not Darken
Tips for the best clear brick sealer that does not darken.
Milky is normal for some
Some siloxanes look white when wet and dry clear. Do not panic mid-job.
Avoid puddles
Pooled sealer can dry with residue or dark spots; back-roll or brush puddles.
Even coverage
Use a low-pressure sprayer with a fan tip for uniform coats.
Dry brick only
Damp brick can trap haze or prevent penetration.
Temperature
Apply within the label temperature range; heat can flash-dry and streak.
Judge after cure
Assess clarity after several days, not hours.
Streak-Free Application
For an invisible finish.
- Apply to clean, dry brick.
- Use a fan-tip low-pressure sprayer.
- Work bottom to top.
- Back-brush any runs or puddles.
Questions about the best clear brick sealer that does not darken:
Frequently Asked Questions
What is the best clear brick sealer that does not darken?
The best clear brick sealer that does not darken is a penetrating siloxane like Prosoco Siloxane PD.
Why does my sealer look white?
Some siloxanes go on milky and dry clear.
Why are there dark patches?
Puddling or over-application in porous spots.
Can I fix haze?
Follow the maker’s guidance; some residue can be removed with solvent.
Is clear sealer shiny?
Penetrating clear sealers leave no sheen.
Final Verdict
Our final pick for the best clear brick sealer that does not darken is the Prosoco Siloxane PD. Choose the Drylok Siloxane 7 if you want milky-to-clear application, or the Siloxane 9500 Penetrating Sealer for brick paving.
Related Guides
More brick sealer guides:
- Best Faux Brick on Amazon
- Best Brick Sealer That Does Not Darken the Brick
- Best Removable Wallpaper That Does Not Damage Walls
- Best Brick Sealer That Repels Grease
- Best Brick Sealer for a Kitchen Backsplash
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.
