AccentBrick is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more.
AccentBrick is reader-supported. As an Amazon Associate we earn from qualifying purchases. This does not change our recommendations. Learn more.
Water ruins paper, foam edges and hardboard. The best waterproof faux brick panels are PVC, which does not absorb water, or thin brick sealed with a breathable sealer, so splashes and humidity do not cause swelling or peeling.
Waterproof panels still are not shower walls; most should stay out of direct spray. Seams and edges need caulk to keep water from getting behind.
Quick Answer: The Best Waterproof Faux Brick Panels
- Best Overall: Concord Wallcoverings 3D Faux Red Brick Wall Panels (Pack of 10)
- Best Light Option: 3D Faux Brick Wall Panels, Whitewash, Peel and Stick Thin PVC, 22.8 x 11.8 in (12 Pcs)
- Best Real Brick (Sealed): Red/Brown Thin Brick Wall Tiles, Clay Manufactured Faux Brick Veneers (60 pcs, 8.5 sq ft)
- Best Large PVC: Dundee Deco PG7064 Vintage Brown Faux Brick PVC 3D Wall Panel, 3.3 x 1.6 ft (Pack of 10)
- Best Waterproof Adhesive: SikaBond Waterproof Construction Adhesive, Gray (10 fl oz)
- Best Sealer for Thin Brick: Max Guard Water-Based Penetrating Stone Sealer (Repels Oil & Water, Low Odor)
Concord’s rigid red PVC is the best waterproof faux brick panel overall; the whitewash peel-and-stick PVC is the best light option, and sealed clay thin brick is the best real-brick choice for damp areas.
Best Waterproof Faux Brick Panels Comparison Table
| Product | Best For | Type | Key Feature | Buy |
|---|---|---|---|---|
| Concord Wallcoverings 3D Faux Red Brick Wall Panels (Pack of 10) | Best Overall | Rigid PVC panels | Interlocking, waterproof, washable | Check Price |
| 3D Faux Brick Wall Panels, Whitewash, Peel and Stick Thin PVC, 22.8 x 11.8 in (12 Pcs) | Best Light Option | Thin peel-and-stick PVC brick panel | Ultralight whitewash brick that cuts with a knife | Check Price |
| Red/Brown Thin Brick Wall Tiles, Clay Manufactured Faux Brick Veneers (60 pcs, 8.5 sq ft) | Best Real Brick (Sealed) | Clay thin brick veneer | Real-texture Red/brown thin brick pieces | Check Price |
| Dundee Deco PG7064 Vintage Brown Faux Brick PVC 3D Wall Panel, 3.3 x 1.6 ft (Pack of 10) | Best Large PVC | Large rigid PVC faux brick panel | Big 3.3 x 1.6 ft sheets, about 5.3 sq ft each | Check Price |
| SikaBond Waterproof Construction Adhesive, Gray (10 fl oz) | Best Waterproof Adhesive | Elastic construction adhesive | Permanently elastic, outdoor rated | Check Price |
| Max Guard Water-Based Penetrating Stone Sealer (Repels Oil & Water, Low Odor) | Best Sealer for Thin Brick | Water-based penetrating sealer | Repels oil and water, natural look | Check Price |
The 6 Best Waterproof Faux Brick Panels
Our picks for the best waterproof faux brick panels.
Concord Wallcoverings 3D Faux Red Brick Wall Panels (Pack of 10)
1Concord’s rigid PVC panels interlock edge to edge and are sold as waterproof, washable and impact-resistant, which makes them the most “permanent-feeling” faux brick we found on Amazon.
👍 Pros & Cons
Pros
- Interlocking edges hide most seams
- Waterproof, washable and impact-resistant PVC
- Can be cut to fit outlets and corners
- Realistic textured red brick face
Cons
- Adhesive is sold separately
- Rigid panels need a flat wall
- Interior use only
📄 Detailed Review
- Material: High-quality PVC
- Coverage: 29.2 sq ft (10 panels)
- Install: Interlocking edges + panel adhesive
- Finish: No priming or filling required
- Use: Accent walls, TV walls, bars, backsplashes
These are the panels to buy when you want a brick wall that can take knocks and wipe-downs. The manufacturer describes them as durable, waterproof, washable PVC with an interlocking design that gives a smooth finish without priming or filling, and lists bars, backsplashes and fireplaces among the intended uses.
Plan on a tube of panel or construction adhesive (and a few brad nails into studs on tall walls). Because the sheets are rigid, they bridge small wall flaws better than thin peel-and-stick sheets, but they still need a reasonably flat, sound surface.
3D Faux Brick Wall Panels, Whitewash, Peel and Stick Thin PVC, 22.8 x 11.8 in (12 Pcs)
2A thin whitewash peel-and-stick PVC brick panel for quick interior makeovers.
👍 Pros & Cons
Pros
- Very light
- Cuts with scissors or a knife
- Quick install
Cons
- Shallow relief compared with rigid panels
- Shows wall bumps
📄 Detailed Review
- Material: Thin PVC
- Color: whitewash
- Panel size: 22.8 x 11.8 in
- Install: Peel and stick
- Use: Interior walls
Clean and prime the wall for best grip.
Press every panel firmly with a roller.
Red/Brown Thin Brick Wall Tiles, Clay Manufactured Faux Brick Veneers (60 pcs, 8.5 sq ft)
3Clay-based thin brick veneers that give the most real brick look of any lightweight option.
👍 Pros & Cons
Pros
- Individual bricks look real
- Real joints you can grout or leave open
- Flexible layout
Cons
- Slower install, brick by brick
- Check material before using near heat
📄 Detailed Review
- Material: Clay manufactured (per listing)
- Color: Red/brown
- Coverage: 8.5 sq ft (60 pcs)
- Install: Thin brick adhesive or mortar
- Use: Walls, backsplashes, fireplaces (per listing)
Set a level line and use spacers for even joints.
Use the adhesive or mortar the maker recommends.
Dundee Deco PG7064 Vintage Brown Faux Brick PVC 3D Wall Panel, 3.3 x 1.6 ft (Pack of 10)
4Dundee Deco’s vintage brown PVC panel covers about 5 square feet per sheet, so a feature wall goes up with few seams.
👍 Pros & Cons
Pros
- Large sheets mean fewer seams
- Rigid PVC resists dents better than foam
- Wipes clean
Cons
- Seams need careful matching
- Needs a flat wall
📄 Detailed Review
- Material: PVC
- Panel size: 3.3 x 1.6 ft (103 x 50 cm)
- Coverage: About 5.3 sq ft each
- Look: Vintage brown brick
- Install: Adhesive
Large sheets are fastest on wide, flat walls.
Use a PVC-rated adhesive plus a few screws in mortar lines.
Check Dundee Deco Vintage Brown Brick PVC (Large) Price on Amazon
SikaBond Waterproof Construction Adhesive, Gray (10 fl oz)
5SikaBond stays permanently elastic, which helps it resist cracking as cold garages and exterior walls expand and contract.
👍 Pros & Cons
Pros
- Stays elastic through seasonal swings
- Fast curing
- Waterproof
- Gray color blends with mortar
Cons
- Gray squeeze-out shows on red faces
- Gun required
- Less instant tack
📄 Detailed Review
- Use: Outdoor and interior construction
- Properties: Permanently elastic, non-corrosive, fast curing
- Color: Gray
Sika describes it as ideal for outdoor applications, non-corrosive and fast curing.
Its gray color is close to mortar, so small squeeze-outs in joints can disappear.
Max Guard Water-Based Penetrating Stone Sealer (Repels Oil & Water, Low Odor)
6Max Guard is a water-based penetrating sealer listed to repel both oil and water with low odor.
👍 Pros & Cons
Pros
- Listed to repel oil as well as water
- Low odor, water-based
- Natural appearance
Cons
- Smaller brand
- Reapply over time
📄 Detailed Review
- Type: Water-based penetrating
- Finish: Natural appearance
- Base: Water-based, low odor
- Best for: Backsplashes, stone, brick
Oil repellency is the key feature for brick behind a stove or on a kitchen backsplash.
Wipe spills quickly even after sealing.
How We Chose the Best Waterproof Faux Brick Panels
To choose the best waterproof faux brick panels, we compared whether each material absorbs water, how its seams and edges can be sealed, how its adhesive copes with humidity and how easily it cleans.
Control humidity in wet rooms, following the EPA guide to mold and moisture.
Product details in this guide come from manufacturer specifications and patterns in verified owner feedback; we do not claim hands-on testing we have not done. Read more on our How We Test page.
Buying Guide: Best Waterproof Faux Brick Panels
Use these tips to choose the best waterproof faux brick panels.
PVC does not absorb water
Solid PVC is naturally waterproof.
Seal thin brick
A breathable sealer helps brick resist water.
Caulk the edges
Water gets in at seams and edges.
Not for showers
Most panels are not shower-rated.
Waterproof adhesive
Choose glue made for damp areas.
Ventilate
Fans prevent moisture build-up.
Wet-Area Tips
Keep water out.
- Caulk edges and seams.
- Run exhaust fans.
- Seal thin brick.
- Stay out of shower spray.
Questions about the best waterproof faux brick panels:
Frequently Asked Questions
What are the best waterproof faux brick panels?
The best waterproof faux brick panels are PVC panels like Concord red brick or whitewash PVC, or sealed clay thin brick.
Can waterproof brick panels go in a shower?
Most are not rated for direct spray.
Is foam brick waterproof?
Foam faces resist water, but edges and adhesive can fail.
Do I need to seal thin brick?
Yes in wet areas.
How do I stop water behind panels?
Caulk all edges and seams.
Final Verdict
Our final pick for the best waterproof faux brick panels is the Concord 3D Faux Brick (10 pk). Choose the Whitewash Brick PVC Panels if you want a light whitewash, or the Clay Thin Brick Veneers (Red/Brown) for a real brick finish in damp areas.
Related Guides
More faux brick guides:
- Best Faux Brick on Amazon
- Best 3D Foam Brick Panels on Amazon
- Best Faux Brick Panels for a Quick Weekend Project
- Best Thick 3D Brick Wall Panels
- 3D Foam Brick Panels for a Game Room Accent Wall Review
Product details are based on manufacturer specifications at the time of writing. Prices and availability change often, so check Amazon for the latest price.
